The April Arts Club at the Central Library in Calgary proved to be
a lot of fun with participants making a funky, woven purse or bag for an iPad.
We raided our quilting scrap bags and those of a friend, who was only too happy
to get rid of fabric leftovers, often to the chorus of “what was I thinking
buying that fabric"?
As always we make a prototype to work out construction and
material needs and for our full class the quantities were rather amazing, 400
strips of variable widths for the body of the bag and another 120 strips for
the braided strap. These were all torn on grain or cut with a rotary cutter.
Bag with braided handle |
Bag with button closure |
We started with an 18" x 14" piece of white Roc-Lon© fabric purchased for another project and
never used and ironed double sided fusible webbing to one side of the Roc-Lon© stripping
away the silicon paper. Most brands of fusible webbing should work.
Fabric Strips |
As time is limited at these sessions we opted to sew the
foundation warp pieces to one end of the Roc-Lon© and used all
tints, tones and shades of blue as the warp.
After a short demo, we let everyone loose to choose strips of
coloured fabrics for their weft pieces and start to weave their bag…over,
under, over, under… The carefully sorted and piled strips of coloured fabric
were soon all askew, somewhat resembling a bird’s nest gone wild.
Once all the weaving was done, they ironed all the pieces to the
fusible webbing. This left some squares open where they could be embellished
with pieces of ribbon, yarn or torn strips of fabric.
Jan then machine stitched the
top and sides of the bag ready for the next step.
A spiral screw punch could also be used for this step.
With the base warp of blues, the purses took on a colourful finish with the participants choices of weft fabrics. There was a great amount of laughter in our two hours and I think it was safe to say that we all had a good time.
Ironing strips to the fusible web. |
The next step was to make
holes on two sides using my very vintage leather punch on the largest hole to
create a hole where a two pieced grommet could be installed.
A spiral screw punch could also be used for this step.
The final step was to feed 3 strips of fabric through the grommet
on one side and tying a knot on the outside. Once that was done the strips were
braided, tying pieces together as needed to make the length of strap they
wanted. The 3 strips were finished off the same way as the start, feeding them
through the second grommet and tying a knot.
With the base warp of blues, the purses took on a colourful finish with the participants choices of weft fabrics. There was a great amount of laughter in our two hours and I think it was safe to say that we all had a good time.
Colourful Weaving |
This would be a great project for a youth group and there would be
a number of items that could be fashioned in the same way.
Lots of decoration |
No comments:
Post a Comment